Modine 610,000 BTU - Hot Water / Steam Unit Heater - Cupro Nickel Heat Exchanger - Vertical

Modine's VN610 is a high grade hot water/steam unit heater that can be fitted into a new or already existing hydronic system with ease. The VN610 can emit 610,000 BTU/hr of heating power with a powerful fan behind it for air propulsion. High grade steel is used for the casing to ensure durability and longevity. Designed for vertical use, the unit heater is well suited for large warehouse use or buildings with tall ceilings. Combined with a simple wiring setup and easy to service motor, the VN610 is an excellent piece of engineering that will serve any building well for years to come.

Product Information:

Motor Cooling Cone
• The VN610 comes equipped with a motor cooling cone standard. This cooling cone shields the motor from heat from the coil, extending the life of the motor and reducing routine maintenance needs.
Easy to Manage Wiring
• The VN610 has easy to manage wiring that all terminates inside of a junction box. This reduces wiring time for your contractor, resulting in cost savings for installation and maintenance.
Tapped Suspension Holes
• The VN610 comes with pre-drilled tapped holes for suspension by threaded rod. This reduces installation time for your contractor, saving you money on installation.
Perfectly Suited for Tall Ceilings
• The powerful fan and vertical orientation combined with its numerous louvre and fin accessories make the VN610 perfectly suited for warehouse and tall ceiling heating applications.
Vertical Fin Design
• Vertical fin design on the VN610 provides minimal opportunity for dust to collect on the fins. This decreases both required maintenance and cleaning time.
Baked-On Polyester Paint
• The VN610 features a neutral colored baked-on polyester paint, providing excellent corrosion resistance and durability while blending in with a wide variety of environments.
Cupro-Nickel Heat Exchanger
• The VN610 uses a cupro-nickel alloy for its heat exchanger instead of standard copper, allowing it to withstand much higher temperatures and pressures.
Modine Installation
• Installation by a professional installer is required by the manufacturer.

General Information:

• Product Category: Unit Heater
• Fuel Type: Hydronic
• Vent Type: Vent Free
• Installation Type: Suspended

Performance:

• BTU Heating: 610,000
• Maximum BTU Input: 610,000
• Maximum Air Flow: 11750 CFM

Electrical Data:

• Voltage: 208V
• Electrical Phases: 3
• Frequency: 60 Hz

Dimensions:

• Height: 51-1/2"
• Width: 51-1/2"
• Depth: 19-1/8"
• Product Weight: 450 lbs

Product Assurance:

• Certifications: CSA
• Made in America
• Warranty: 2 Year Parts